• FORE A.Ş. |
  • DISASTER AND CRITICAL STRUCTURES MONITORING
    "ADVANCED TECHNOLOGIES & R&D" Since 2000
  • FORE TEST CİHAZLARI | Beton | Zemin | Asfalt | Çimento | Agrega için, beton, zemin, asfalt, çimento, tahribatsız beton, yapı test cihazları, endüstriyel sektör, hakkımızda, referanslar , Tahribatsız Test Cihazları, Gelişmiş Yapı Test Cihazları, Agrega Test Cihazları, Mobil Laboratuvar, Beton Test Cihazları, Zemin Test Cihazları, Çimento Test Cihazları, Asfalt Test Cihazları, Genel Laboratuvar Test Cihazları, ANKARA, iletişim, e katalog, haberler, servis, arıza, teknik servis, form, ürünler, ithalat, ihracat, inşaat teknolojisi
  • FORE TEST CİHAZLARI | Beton | Zemin | Asfalt | Çimento | Agrega için, beton, zemin, asfalt, çimento, tahribatsız beton, yapı test cihazları, endüstriyel sektör, hakkımızda, referanslar , Tahribatsız Test Cihazları, Gelişmiş Yapı Test Cihazları, Agrega Test Cihazları, Mobil Laboratuvar, Beton Test Cihazları, Zemin Test Cihazları, Çimento Test Cihazları, Asfalt Test Cihazları, Genel Laboratuvar Test Cihazları, ANKARA, iletişim, e katalog, haberler, servis, arıza, teknik servis, form, ürünler, ithalat, ihracat, inşaat teknolojisi

Windsor® Probe


Determination Of Sink Resistance Of Windsor ® Probe Hardened Concrete

Z-WP-1000 the Windsor ® HP probe System/Z-WP-700 electronic measuring device probe Windsor (Windsorlinx Software)/Z-WP-534 Windsor ® Probe System Manual/Z-WP-1000-Ext Windsor ® probe system Additional Warranty/consumables (must be ordered separately)/U-THU-01 Silver Standard density Probe for concrete/U-PRS-03 Hafif Betonlar İçin Altın Prob

Explanation:

It measures the compressive strength of concrete on site, accurately and efficiently. The Windsor ® HP Probe system quickly and accurately determines the concrete compressive strength of a structure by inserting a probe into concrete with known Force. Developed and continued to be developed for 30 years, this modern system can measure concrete up to a maximum compressive strength of 17,000 PSI (110MPa). It is ruggedized for use in the construction environment and lightened to provide the user with a simpler system. It is recommended to be used with the Z-wp-700 electronic measuring device for later review or installation on a computer and to help ensure proper test results. It’s a non-destructive system. It can be used on fresh and hardened concrete with the same degree of efficiency. Equally accurate results can be obtained on horizontal or vertical surfaces, provided that the probe is thrown perpendicular to the test surface or at the correct angle.

Request Offer
Kategoriler:

Açıklama

Probe Penetration Testing Device for Concrete Testing

1) Probe penetration testing, a non-destructive testing method that does not weaken the load-bearing structure like core drilling and has been widely used in the USA since 1972, should be expanded.

2) In concrete testing with a concrete test hammer, rebound numbers are obtained based solely on surface hardness. Probe penetration testing is a much more effective method for determining the compressive strength and properties of the internal structure of concrete.

USA STANDARD:
ASTM-C803 … Standard Test Method for Penetration Resistance of Hardened Concrete
ACI 228 R1

UK STANDARD:
BS EN 13537

And Türkiye STANDARD:
TSE 13537 (December 2012) Test Method for Determining the Penetration Resistance of Hardened Concrete

ALTHOUGH VERY DETAILED TRAINING IS REQUIRED ABOUT THE WINDSOR PROBE, SOME OF OUR VIDEOS ARE PUT BELOW FOR YOUR INSPECTION:

1) After the Earthquake – Sections from the Work Conducted by Our University Professors in the Earthquake Field:

2) Short Video (A Section from the European University of Lefke) 2 Short Videos:

3) General Presentation:

4) Training Video:

İlgili ürünler