{"id":2443,"date":"2020-10-15T21:07:15","date_gmt":"2020-10-15T18:07:15","guid":{"rendered":"https:\/\/foreas.com\/en\/?post_type=product&p=2443"},"modified":"2020-11-13T14:24:21","modified_gmt":"2020-11-13T11:24:21","slug":"plaka-yukleme-test-cihazi","status":"publish","type":"product","link":"https:\/\/www.foreas.com\/en\/urun\/plaka-yukleme-test-cihazi\/","title":{"rendered":"Plate Loading Tester"},"content":{"rendered":"","protected":false},"excerpt":{"rendered":"
\n
\n

Explanation:<\/strong><\/p>\n

Bored automatic cement bending \/ pressing Test press is designed for reliable and consistent testing of bending tests of 40x40x160 mm mortar prism molds and pressing tests of 40x40mm parts or 50\u00d750 mm and 70.7 mm mortar cubes after bending tests.
\nThe device is manufactured in accordance with all en, ASTM and BS standards written above, as well as CE norms for the safety and health of the operator.
\nPressing and bending jigs, intermediate distance parts and transparent front and rear doors that can also be installed and decoupled (must be installed in the factory) must be ordered separately.
\nThe automatic cement bending \/ pressing Test press allows even inexperienced operators to use it.<\/p>\n

 <\/p>\n

The operations that need to be done are quite simple and are as follows;
\n* Setting Test parameters, including speed ratio\u2022 selecting the pressure or bending body using the valve\u2022 selecting the capacity of the body (to call the required load cell calibration values)\u2022 taking the body to the bending or pressing part using the load cell fluid (up\/down)\u2022 pressing the start button on the control unit<\/p>\n<\/div>\n<\/div>\n

Automatic Cement Bending \/ Pressing Test Press Consists Of The Following Parts;<\/strong>
\n\u2022 Two column loading body\u2022 * automatic hydraulic power unit\u2022 * Digital Data Acquisition and Control System.<\/p>\n

Cement Bending & Pressing Loading Body<\/strong>
\nIn the loading body, high quality load cells of 15 kN and 250 KN are used to take high-precision load measurements.
\nAll bodies have 16 165 mm plates and should be used with appropriate bending or pressing jigs.
\nIntermediate Distance Decks<\/strong>
\nThanks to the modular design of the frames, any sample with the appropriate size, load and speed can be tested in both parts by reducing the distance between the plates.
\nTop Plates<\/strong>
\nThe top plates made of high quality steel are hardened (more than 53 HRC), flattened.
\nThe surface roughness value of pressure plates and additional headers is 3.2 um.<\/p>\n

Loading Roller Parts & Limit Switch<\/strong>
\nA one-way moving piston is available in the loading bodies. Piston diameters vary according to the capacity of the device.
\nThe maximum piston travel distance is 50mm. Against overload, the device has a Limit switch that limits the Piston travel distance.<\/p>\n

HYDRAULIC POWER UNIT AND DIGITAL DATA ACQUISITION & CONTROL SYSTEM<\/strong><\/p>\n

Hydraulic Power Unit
\nThe automatic hydraulic power unit has double stage pump.
\nControlled by a digital Reading unit, it is designed to transfer oil to the piston in a controlled manner to ensure the necessary pressure in the loading body.
\nThe power unit, which is quite quiet, can load with \u00b15% accuracy between 0.05 and 2.4 kN\/SEC.
\nFast loading pump and safety valve (maximum pressure valve) are standard with the device to prevent overloading.
\nDouble Stage Pump<\/strong>
\nDouble stage pump consists of two groups.
\n1. High flow low pressure gear pump2. High pressure radial piston pump
\nHigh flow low pressure gear pump is used for fast preloading.
\nA high-pressure radial piston pump provides the high-pressure oil needed for testing.
\nThanks to the fast loading pump, the device automatically starts loading quickly, the fast approach ends when the sample contacts the top plate, and the loading continues at the speed selected by the user, and automatically stops when the sample is broken. This, in turn, allows the user to conduct many experiments in a short time.
\nEngine<\/strong>
\nThe AC motor controlled by the motor inventor drives the double stage pump.
\nThe change in oil flow is achieved by changing the rotation speed of the engine.
\nThe maximum operating pressure of the system is 400 Bar.
\nDistribution Block<\/strong>
\nThe distribution block is used to control the flow direction of the oil provided by the double stage pump.
\nOn the distribution block are solenoid valve, safety valve (maximum pressure valve), pressure transducer, high flow low pressure gear pump and high pressure radial piston pump.
\nOil Tank<\/strong><\/p>\n

The oil tank contains enough oil to fill the hydraulic system and push the piston during the experiment.
\nThe oil level and temperature can be seen from the indicator available above the oil tank.
\nThe Tank has a capacity of 25 L. Number 46 hydraulic engine oil should be used.
\nDigital data collection and Control System<\/strong>
\nThe unit is designed to control the machine and process data from load cells or pressure transducers.
\nAll operations are controlled from the front panel consisting of the LCD screen and function keys.
\nThe unit has an easy-to-use menu.
\nLoad speed and load values can be monitored in the digital graphic display unit.
\nDigital graphic display can draw a real-time \u201cload & time\u201d chart
\nSoftware<\/strong><\/p>\n

Company, laboratory and sample information can be entered into the program. \u201d Load & time ” chart, test reports and sample reports can be obtained<\/p>\n

Main Features<\/strong>
\n\u2022 Depending on the diameter of the piston, or 0.05 KN\/SEC and 2.4 kN\/SEC loading speed control\u2022 2 to be able to control the body (optional,\u2022 to be able to test with a controlled Load,\u2022 a test chart real-time viewing\u2022 analog channels for different frame load cells\u2022 10 data per second sample rate for each channel\u2022 computer interface Rs-232 serial port connection\u2022 LCD display\u2022 multi-language support (English and Turkish)\u2022 2 different unit system selection; SI and metric\u2022 real-time clock and date\u2022 Test control and test reports, which allows printing of Free Software.<\/p>\n

 <\/p>\n

Security features<\/strong>
\n\u2022 Maximum pressure valves to prevent overloading,
\n* Limit switch limiting Piston travel distance,
\n* Emergency Stop Button,
\n* Software controlled maximum load limitation
\n\"\"<\/a> \"\"<\/a><\/p>\n","protected":false},"featured_media":3102,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[30],"product_tag":[],"_links":{"self":[{"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/product\/2443"}],"collection":[{"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/comments?post=2443"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/media\/3102"}],"wp:attachment":[{"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/media?parent=2443"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/product_cat?post=2443"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.foreas.com\/en\/wp-json\/wp\/v2\/product_tag?post=2443"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}