(J20;KOROZYON5) BASİT YÖNTEMLİ KOROZYON EKİPMANI

An economical method for identifying areas of corrosion ASTM C-876.

A high impedance voltmeter is connected between the reinforcing steel and a Cu-CuSO4 reference electrode on the concrete surface where a measurement can be made for the half-cell potential.

This measurement of the probability of corrosion activity. By testing at a fixed distance apart, a grid of half-cell potentials can be developed and areas delineated.

   Features & Benefits:

Technical
Corrosion, which is an electrochemical process, occurs in concrete when oxygen and moisture are present. The actual corrosion is an exchange of energy within different sections of the uncoated reinforcing steel. The relative energy levels can be determined in relation to a reference electrode with a stable electrochemical potential.

By connecting a high impedance voltmeter between the reinforcing steel and a reference electrode placed on the concrete surface, a measurement can be made for the half cell potential at the location of the reference cell. This then is a measurement of the probability of corrosion activity in the steel in the vicinity of the reference cell.

The reference cell is copper in copper sulphate solution. By taking half cell potential measurements a fixed dis-tance apart a grid of half cell potentials can be quickly made and thus areas delineated with a high probability of corrosion of the reinforcing steel.

To analyze the results, the measurements made with Cor Map can be plotted on a grid and lines of equipotential contours drawn, highlighting areas of possible corrosion activity.

For example the following guide is listed in ASTM

C-876 using a copper/copper sulphate half cell:

• For readings of –350mV and greater there is a 95% chance of active steel corrosion

• For readings –200 to –350mV there is a 50% chance of active steel corrosion

• For readings less than –200mV there is only 5% chance of active steel corrosion

The method is particularly useful for:

• Bridge Decks

• Parking Garages

• Concrete Piers & Docks

• Substructure

• Tunnel Lining

• Foundations

-----------------------

Web sayfamızda yer alan cihazlar fikir vermek içindir;

model, şekil ve teknik özelliklerini değiştirme hakkı firmamıza aittir.

( FORE CO. reserves the right to alter specifications to equipments to any time. )