(J08;Rebar Locator3) Digital Reinforcement Bar Locator, Rebar Finder

(Made in USA)

(FR-J/R306)   SAHADA GÜÇLENDİRME DONATISININ, ELEKTRİK KABLOLARININ, BAKIRIN, TESİSAT KANALLARININ TESPİTİ, DERİNLİĞİ ve ÖLÇÜSÜNÜ VEREN "DÜZGÜN OLMAYAN YÜZEYLERDE KULLANILABİLEN" EL TİPİ MİNİ DİJİTAL - DONATI TESPİT AYGITIDIR

--------------------------------------------------

The James Mini R-Meter

Mini R-Meter Digital Rebar Locator, Rebar Finder

Digital Reinforcement Bar Locator, Rebar Finder

A rugged hand held field instrument for finding the location,
depth and size of reinforcement rebar, post tension, copper and
conduit in place.

-------------------------------------
         Features & Benefits:

The Mini R-Meter is a completely digital, rugged hand held field instrument for finding the location, depth, and size of reinforcement bars in place.

The Mini R-Meter is a completely digital, light weight and inexpensive, easy to use unit to locate and size rebars. Rebar detection of up to 10” (250mm) can be accomplished when locating large diameter rebar. An easy to read display, 4 hr battery life are just a few advantages that makes the Mini Rmeter one of the most advanced handheld units in the field today. The sensor design allows the end user to quickly and
accurately locate and determine concrete cover in corners or hard to reach areas. The system allows the user to select between Imperial and Metric units, and the data can be saved in the instrument for posterior uploading to a computer. The data is saved in the system with the date and time of the record to help identify prior test taken. The Mini-RMeter rebar locator is also capable of locating non ferrous metals.

The eddy current sensor was specifically designed to react with the presence of currents on the outer surface of metal objects. It is uninfluenced by small metal particles in the concrete, whether the concrete is fresh or hardened, wet, or dry. The eddy current
sensor also allows the unit to locate both ferrous as well as non-ferrous metals in concrete; thereby finding not only steel reinforcing bars accurately, but tendons, copper tubing, conduit, and more.

The latest in microprocessor technology not only conditions the signal from the sensor for more accurate and dependable results but provides the user with the information they need.

Built in memory can store over 150 individual data points for later processing.

   ------------------------------

Detection and Orientation of Rebars
The exact position and orientation of rebars can be measured quickly and accurately. Rebar-free areas can be identified for
coring, grinding, resurfacing, or insertion of new machinery mountings.

The instrument can be used to inspect new structures for compliance with specifications as well as old structures under modification.

Measurement of Concrete Cover
The exact position and orientation of rebars can be measured quickly and accurately. Knowing the size of the rebar, concrete cover can be detected and the distance between the concrete and the surface it will appear in the easy to read display.

Location of Metals
Locate any metals, as pipe, flues, wire, and sheets embedded in
concrete, masonry, or wood. Identification is possible to a depth of 10 inches.

Location of prestressed Cables
Locates the position of cables and lost tendon splices in pre or post tension concrete products.

--------------

Web sayfamızda yer alan cihazlar fikir vermek içindir;

model, şekil ve teknik özelliklerini değiştirme hakkı firmamıza aittir.

( FORE CO. reserves the right to alter specifications to equipments to any time. )