 |
(J26;MOISTURE2) For RAPID DETERMINATION of MOISTURE in WET CEMENT and CONCRETE (WATER/CEMENT RATIO)
|
(J26;MOISTURE2) For RAPID DETERMINATION of MOISTURE in WET CEMENT and CONCRETE (WATER/CEMENT RATIO) |
||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||
(Made in USA)(FR-J/M323) YAŞ ÇİMENTO ve BETONDAKİ NEMİ HIZLI TANIMLAYABİLEN MİKRODALGA NEM ÖLÇERSU ve ÇİMENTO ORANINI ÖLÇME CİHAZI-------------------------------------------------Cementometer™ |
|||||||||||||||||||||||||||||||||||||
Fast and easy to use; simply insert the | |
Accurate | |
Completely Portable | |
Full range of water cement ratio’s Instantaneous readings |
The James Cementometer™ represents a break-through in modern moisture measurement technology. By utilizing the latest microwave and microprocessor science, the Cementometer™ can determine the moisture content of freshly mixed cement, concrete, and mortar. Simply insert the prongs of the probe into the material to be measured and instantaneously the water cementratio is shown on the easy to read display.
The Cementometer™ Microwave moisture meter uses a two
prong sensor to measure the complex dielectric constant of the material in contact with the prongs. As the dielectric constant of water is four to eight times greater than most aggregates and cements, changes in water content directly effect the sensor output.
An average of five to ten readings is normally taken in order
to ensure a valid reading. This output is then converted by the integrated microprocessor and moisture content is displayed directly.
Two units are available to encompass the full range of water
cement ratio’s found in wet concrete. The Cementometer™ Type R handles normal water cement ratio’s with its two prong probe.
The range of this instrument is approximately 0.35 to 0.65
water/cement. Cementometer™ Type L handles low water/cement ratio’s with its five prong probe. The range of this instrument is approximately 0.25 to 0.5 water cements.
The units come calibrated for standard type I, II, and III
cements. It can also be programmed with up to ten different mix design by the user. For highest accuracy, the user should program the unit for the material being used. The Cementometer™ Type R has simple to use calibration process that rapidly creates the user programs without the need for external computing devices.
Finally, the Cementometer™ can store over 150 readings. Storage is complete with the time and date for future reference. Data can be recalled via RS-232 interface to a personal computer running
Specifications | |
T-C-10 | Cementometer™ Type R for regular water cement ranges |
Water Cement | approximately 0.35 – 0.7 |
Power: | 4AA Batteries |
Display: | 2 x 16 Char. Trans - reflective |
Data Link: | RS-232 |
Weight: | approximately 4 lbs (1.8 kgs) |
T-C-20 | Cementometer™ Type L for low water cement ranges |
Water Cement | 0.25 – 0.5 |
Power: | 4AA Batteries |
Display: | 2 x 16 Char. Trans - reflective |
Data Link: | RS-232 |
Weight: | approximately 4 lbs |
------------------------------------------------------------------
Web sayfamızda yer alan cihazlar fikir vermek içindir;
model, şekil ve teknik özelliklerini değiştirme hakkı firmamıza aittir.
( FORE CO. reserves the right to alter specifications to equipments to any time. )
Last Updated: